Rack& pinion ladder guided service lift,Lifting Series,Beijing Yuefeng Guangde Energy Technology Group Co.,Ltd.

Product introduction

The service lift relies on the rack and pinion drive transmission, and the lift can be controls through the precise engagement of the pinion and rack, providing large load capacity and faster running speed. It can be pre-installed in the tower in advance, and can be used during the tower erection period. It can use the cable-free guide rail power supply system can also be used for safer, which is more suitable for the large wind turbines and offshore wind tower.

Product details

Product advantages

The Max. load can reach 480kg, and it can accommodate 4 people at the same time, providing more possibilities for operation and maintenance technicians
Taking more stringent standards from the process to the manufacturing, from the structure to the material, the performance improved, energy consumption reduced
Independent fall protection system, maximum protection of travelling safety
No waiting period, it can also be used easily in erection period
Provides faster lifting speed, travelling more efficiently, the speed can reach 36m/min, which is 2 times of traditional lift’s speed.
The new sliding touch power supply system not only solve the issue of cable collection, but also solves the problems of broken skin and breakage of the power cable, which is safer.
Rack and pinion drive instead of traditional wire rope drive, transmission efficiency increased by more than 15%, more stable and smooth operation
Built-in two drive lifting systems, when one breaks down, the other can still travel safely the under low load, as backup drive.
Meet GB and CE standards, provide a variety of configurations to satisfy the diversified demands of customers
Equipped with independent escape system, two drive systems, variable frequency drive, overload protection system, manual descend system, etc., to bring comprehensive protection

Product specifications

The basic design specifications of standard products are shown in the figure, which supports customized design following the actual needs of customers.

RP02-480

Product model	RP02-480	Operating speed	18/36m/min	Voltage/Frequency	400 V, 50/60 Hz, 3P+PE
Rated load	480kg	Power	2.2/4 kW x 2	Operating temperature	－30℃～＋60℃
Passengers carried	4persons	Cabin dimensions	1200x860x2820mm	Ambient temperature	－60℃～＋75℃

RP03-350

Product model	RP03-350	Operating speed	18/36m/min	Voltage/Frequency	400 V, 50/60 Hz, 3P+PE
Rated load	350kg	Power	1.5/3kW x 2	Operating temperature	－30℃～＋60℃
Passengers carried	3persons	Cabin dimensions	1200x860x2820mm	Ambient temperature	－60℃～＋75℃

RP01-240

Product model	RP01-240	Operating speed	18/36m/min	Voltage/Frequency	400 V, 50/60 Hz, 3P+PE
Rated load	240kg	Power	1.5 kW x 2	Operating temperature	－30℃～＋60℃
Passengers carried	2persons	Cabin dimensions	1030x750x2690mm	Ambient temperature	－60℃～＋75℃

*Parameters are only for reference, customized design following the actual use requirements.

Application case

Crane Series

Damper Series

Lifting Series

PPE Series

Custom-made Series

Wind turbine accessory

PRODUCT

Rack& pinion ladder guided service lift